济南家装常见的错误分析
发布人:http://www.chinazhuoyou.com发布时间: 2017-08-03 10:37:56 浏览次数: 0

破坏性装修一:任意拆改承重墙

Destructive decoration one: arbitrary demolition of the load wall

错误后果:有的居住者为了改变原有居室的空间分隔,随意地在承重墙上穿洞、拆除连接阳台门窗的墙体,有的甚至把承重墙体直接拆除,使圈梁成为房屋承重构件,严重破坏了房屋的整体刚度。

Error: the consequences of some residents to change the original bedroom space, freely in the walls, piercing windows and doors removed from the balcony wall, some even put the load-bearing wall directly removed, so that the beam become housing bearing component, serious damage to the overall stiffness of the house.

济南家装装修公司区分承重墙的方法

Method for distinguishing bearing wall

一、看户型图资料

First, see Huxing figures

在房屋户型图中,工程图上标注为黑色的墙体都是承重墙,标注为白色部分的墙体为非承重墙,这类墙体可以改造拆除,对房屋建筑不会有影响。

Housing units in the map, marked black on the project wall are load-bearing walls, marked as white part of the wall for non load wall, such walls can be modified to remove, the housing construction will not have an impact.

二、看房屋的结构

Two, look at the structure of the house

一般地讲,砖混结构的房屋所有墙体都是承重墙。框架结构的房屋外墙为承重墙,内部的墙体一般都不是承重墙。

Generally speaking, brick concrete structure of housing, all walls are load-bearing walls. The exterior wall of the frame structure is a load-bearing wall, and the interior walls are generally not load-bearing walls.

破坏性装修二:随意大改动功能空间

Destructive decoration two: free big change function space

错误后果:随意大改动房屋的功能空间,很容易造成安全事故。比如将厨房改成卧室,这种做法极其危险,因为一旦煤气泄漏,后果不堪设想。

Error consequences: arbitrarily change the function of the housing space, it is easy to cause security incidents. For example, the kitchen into the bedroom, this approach is extremely dangerous, because once the gas leak, the consequences will be unimaginable.

正确做法:需要经过严密的可行性审查之后,才可变动房屋原本的功能空间。

Correct approach: after a rigorous feasibility review, it is possible to change the original functional space of the house.

破坏性装修三:过多使用超重的装修材料

Destructive decoration three: excessive use of overweight decoration materials

错误后果:家庭装修中,大面积铺设大理石、用砖砌内墙和做结构复杂的吊顶等有时需要大量使用超重材料,可能会使房屋的承重超过设计标准,导致楼房倾斜和下沉。

20160909093606446.jpg

Error: the consequences of the family decoration, a large area laying marble, brick wall and the complex structure of the ceiling, sometimes need to use large amounts of excess material, may make the load-bearing housing more than design standards, leading to the building tilt and sinking.

正确做法:建议不要大量使用超重的装修材料。比如抬高地面时,避免采用实心结构的钢筋混凝土;铺设花岗岩和大理石时,应尽可能控制铺设面积;分隔房间的墙体最好采用轻钢龙骨或内填隔音隔热材料的木结构;做吊顶时,应简化结构,选用轻质材料。

The correct approach: it is recommended not to use a large number of overweight decoration materials. Such as the elevation of the ground, avoid using solid reinforced concrete structure; laying of granite and marble, it should be possible to control the laying area; the wall separating the room with the best wood structure of light steel keel or filled with insulation material; the ceiling, should simplify the structure, use of lightweight materials.

破坏性装修四:大量使用易燃装修材料

Destructive decoration four: a large number of flammable decoration materials used

错误后果:在装修中,大量采用易燃不防火的装饰材料。如木地板,木墙裙,木吊顶,塑料制品,壁纸,墙布,地毯等,当这些材料被卷入火灾会助长火势蔓延和扩展,造成生命安全和财产损失。

Error consequences: in the decoration, a large number of flammable, non fire decorative materials. Such as wood flooring, wood paneling, wood ceiling, plastic products, wallpaper, wallpaper, carpet, when these materials are involved in the fire will encourage the spread of fire and expansion, causing life safety and property loss.

正确做法:装修中宜选用铝塑装饰板,铝合金龙骨,石膏制品,天然石材,地面砖等美观大方确保安全的不燃或难燃的装饰材料;此外,即使不可避免需用易燃装修材料,使用前需要做好材料的防火处理。

The right approach: decoration should use decorative aluminum plate, Aluminum Alloy keel, gypsum, natural stone, brick and other appearance to ensure the safety of the non combustible or difficult burning decorative materials; in addition, even if the inevitable need of flammable decoration materials, fire prevention materials need treatment before use.


上一篇:夏季墙面涂刷五大忌装修知识
下一篇:夏季办公室装修所注意事项分享

版权所有:济南金派装饰工程有限公司  电话:0531-82826738
联系地址:山东省济南市高新区舜泰广场6号楼2501E   备案号:鲁ICP备17026442号-1