Now the old electrician is so installed, safe and convenient:
General professional electrician master, but also the use of welding machine, the wire welding firm, and then wrapped in a layer of electrical adhesive tape can be, the use of good results, and construction methods are relatively simple.
2, pliers winding
The following diagram, we use pliers wire winding is the construction method, the first few laps winding wires with pliers, then left in the middle of the head, and then use the pliers to the middle of ninety percent off, and the construction method of the ground wire is very strong, do not have to worry about the day after use will fall off.
3 、 wire connector
In this technologically advanced society, the wire line is no longer the wire will screw up, and then using the electrical tape wrapped, general electrician is the connector directly to the hardware store to buy some wires, the connector cost is not high, a few cents, the operation is very convenient, direct the two wires are mounted on the line, can be completed, so that electricity is also in safety, greatly improve the efficiency of construction electricians at the same time, we can also save a lot of labor costs.
4 、 electric drill winding method
The electrician technology requirements are relatively high, for some experienced old electrician to operate, the drill bit for card head, then lay the wire clamping head, opened after the drill takes only a second time, and drill through rapid operation, the wire can be wound neatly. But also very strong
Home decoration circuit is the most important, once there is a problem, there will be a variety of troubles. So everyone in the home decoration when the circuit, must avoid various problems, especially in a recent public notice, it is time to merge the circuit, don't be silly taped up, because this is not leakage protection qualified, and this kind of connection is not suitable for the age the development, once the wire loss, then it may lead to a dangerous power or short circuit.