工装装修的主要四点验收内容!
发布人:http://www.chinazhuoyou.com发布时间: 2019-09-12 16:08:43 浏览次数: 0

在装修过程中,因为不同的工程项目有各自的特殊性,所以关于工程验收并没有一个统一的标准,下面小编就以济南工装装修为例,为大家总结一下工装装修主要生物四点验收内容,希望对大家有所帮助!

In the process of decoration, because different projects have their own particularities, there is no unified standard for engineering acceptance. The following edition takes Jinan tooling decoration as an example to summarize the main biological four acceptance content of tooling decoration, hoping to help you!

一、木工的验收

I. Acceptance and Acceptance of Woodworking

1、构造是否直平?无论水平方向,还是垂直方向,正确的木工做法都应是直平的。

1. Is the structure straight? Whether horizontal or vertical, the correct carpentry practices should be straight.

2、转角是否准确。正常的转角都是90度的,设计因素除外。

2. Whether the corner is accurate or not. Normal corners are 90 degrees, except for design factors.

3、弧度与圆度是否顺畅规圆?除了单个要保证其看上去顺畅外,多个同样造型的还要确保造型的一致性。

3. Are radians and roundness smooth and regular? In addition to the individual to ensure that it looks smooth, many of the same shape to ensure the consistency of the shape.

4、对称性木工项目是否正确对称。

4. Whether symmetrical woodworking projects are correct and symmetrical.

5、天花角线接驳处理顺畅,没有明显不对纹和

5. Smallpox corner connection is handled smoothly without obvious misalignment and misalignment.

6、地脚线安装平直,离地准确。

6. Installation of baseline is straight and accurate.

二、油漆的验收

2. Acceptance and acceptance of paints

1、墙面乳胶漆应表面平整、反光均匀。没有空鼓、起泡、开裂现象。

1. Wall latex paint should be smooth and uniform in reflection. There is no empty drum, bubbling and cracking.

2、木质和石膏板天花的油漆一般为乳胶漆,应表面平整,板接处没有裂缝。

2. Wood and gypsum ceiling paints are generally latex paints. They should have a smooth surface and no cracks in the joints.

3、天花角线接驳处理顺畅,没有明显不对纹和变形。

3. The connection of smallpox corner line is smoothly handled without obvious misalignment and deformation.

济南工装装修

三、泥工的验收

3. Acceptance and acceptance of masonry

1、砖面平正,没有倾斜现象。

1. Bricks are flat and not inclined.

2、砖面缝隙规整一致。

2. The cracks on the bricks are regular and uniform.

3、砖面没有破碎崩角现象。

3. There is no breakage angle on the brick surface.

4、带图案的瓷砖方向正确,没有反转现象。

4. The direction of the tiles with patterns is correct and there is no reversal.

5、花砖和腰线位置正确,没有偏位或高度错误现象。

5. Bricks and waistlines are positioned correctly without deviation or high error.

四、金工的验收

IV. Acceptance and Acceptance of Metalworking

1、金属体构造平直,如是窗体部分,要求胶条等封闭件完整。

1. The metal structure is straight. If it is part of the form, the sealing parts such as rubber strip should be complete.

2、金属窗体操作灵活,没有阻碍。

2. Metal forms are flexible and unhindered.

3、规格、管壁厚度达到要求厚度。

3. Specification and wall thickness meet the required thickness.

4、窗体与窗洞间有没有发生渗漏雨水现象?

4. Does rain leakage occur between the window and the window?

以上就是小编给大家整理提供的精彩内容了,如果大家还有疑惑的地方,欢迎给我们留言评论,大家也可以到济南工装装修的网站咨询客服人员:http://www.chinazhuoyou.com

Above is the wonderful content that Xiaobian has provided to you. If you have any doubts, please leave us a comment. You can also consult the customer service staff at the website of Jinan tooling renovation: http://www.chinazhuoyou.com.


上一篇:如何装修出带有层次感的办公写字楼?
下一篇:办公写字楼装修的水电工程十分重要!

版权所有:济南金派装饰工程有限公司  电话:15550425555 / 15668334444
联系地址:山东省济南市高新区舜泰广场6号楼2501E   备案号:鲁ICP备17026442号-1